TOTAL $0.00

Crown XTI 1002 Amplifier, 275w @ 8 ohms Per Channel XTi1002

Be the first to review this product

Bookmark and Share

Availability: In stock

Only 10 left


Quick Overview

The Crown XTI Series defines the standard for portable PA systems in technology, innovation, performance and affordability.

Crown XTI 1002 Amplifier, 275w @ 8 ohms Per Channel XTi1002

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

The Power to Move You

Crown’s XTi family of amplifiers defines the standard for portable PA systems with unmatched performance, technology and power-to-the-people affordability that delivers the goods night after night without even breaking a sweat. There’s no debate — when you choose Crown’s XTi Series, you’re choosing one of the most powerful and efficient amplifiers on the market today.

How do we do it? With innovations designed to simplify your life and rock their world. Innovations like integrated DSP that allows you to quickly and easily configure crossovers, EQ, limiting and delay, along with tools like a pink noise generator, subharmonic synthesizer, and universal tracking switch-mode power supply, which reduces power draw and waste heat. And as the first Crown amps to use Icepak™ thermal modeling software, they are at the top of their class when it comes to thermal efficiency and lightweight portability.

The XTi Series demands respect without making demands on you. With this kind of freedom and reliability, the XTi family is one you’ll always want to be a part of. XTi. The power to move you — and the world


  • Peakx Plus™ Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release


  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning


  • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application


  • New system monitoring provides software visibility of AC line voltage and power supply temperature


  • Integrated cast-aluminum handles for easy handling and enhanced durability


  • Locking power cord clip provides a secure connection between the amplifier and power cord


  • Updated HiQnet Band Manager™ and System Architect™ control software


  • Increased number of presets to a total of 30; 29 of which are user definable


Additional Information:



Minimum Guaranteed Power, (1 kHz Per channel, both channels driven)

Stereo, 2 ohms (per ch.): 700W
Stereo, 4 ohms (per ch.): 500W
Stereo, 8 ohms (per ch.): 275W
Bridge-Mono, 8 ohms: 1000W
Bridge-Mono, 4 ohms: 1400W


Integrated Processing

Input EQ: 6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ±15 dB bandpass gain and polarity control.

Output EQ: 8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Delay: for signal alignment of driver; 50 mS of total delay.

SubHarmonic Synth: takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

Peak x Plus Limiter: user defeatable limiter that allows users to control Threshold, Attack, and Release times.

Presets: 30 total presets, 29 of which are user-definable.


Sensitivity (for full rated power at 4 ohms): 1.4 Vrms

Frequency Response (at 1 watt, 20 Hz - 20 kHz): +0 dB, –1 dB

Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms): 100 dB (A weighted)

Total Harmonic Distortion (THD): <0.5%

Damping Factor 20 Hz to 1 kHz: >500

Crosstalk (below rated power): 20 kHz - 1 kHz: > 70 db

Input Impedance (nominal): 20k ohms balanced, 10k ohms unbalanced

Maximum Input Signal: +22 dBu typical

AC Line Voltage and Frequency Configurations: 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz

AC Line Current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per channel): 6.8A; no more than 38W at idle

Operating Temperature: 0°C to 40°C at 95% relative humidity (non-condensing)


Level: two front-panel rotary level controls, one for each channel

Power Switch: On/Off switch applies AC power to the amplifier

Sel/Prev/Next Buttons: three buttons near the LCD screen that are used to access menu items and front panel lockout

LCD Screen: backlit liquid crystal display that shows preset and processing status  



Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

–10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.

–20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip.

Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion

Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditions

Power Indicator: Blue LED illuminates when the amplifier has been turned on and has power  


Input/Output Connectors

Input Connectors: XLR, one per channel

Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.

Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor

cable. Two binding post outputs (in parallel with Speakon connectors).

HiQnet USB Connector: Type B, connects to HiQnet network.  



Chassis: Steel

Front Panel: Cast-aluminum

Cooling: Proportional speed fan with front-to-rear airflow.

Dimensions: 19" (W) x 3.5" (H) x 12.25" (D)

Net Weight: 18.5 lb. (8.4kg)

Shipping Info Ships standard ground usually the same or next business day.
Warranty Standard 3 yr Crown Warranty
Brand Crown
MPN XTi1002
UPC 0871015005232
Weight 18.5000

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register